MIX8060 Electrochemical Hydrogen (H2)Gas Sensor

  • Target Gas: H2/Hydrogen
  • Range :0 ~ 1000 ppm/0 ~ 5000 ppm
  • Application: Vehicle new energy hydrogen leakage monitoring, H2 leakage monitoring for industria

Send Email: sales@mixsen.com

Principle Introduction:

MIX8060  Hydrogen (H2) Gas Sensor is a battery operable electrochemical  sensor developed by Mixsen. Hygrogen and oxygen on the working electrode and counter electrode are subjected to oxidation-reduction reaction correspondingly. This produces the electric current. The current is directly proportional to the concentration of hydrogen and following the Faraday’s law. Through measure the current to get the concentration of hydrogen.

Feature:

High selectivity and sensitivity to H2
High accuracy
Linear output
Long life
Environmental protection design

Application:

Vehicle new energy hydrogen leakage monitoring
H2 leakage monitoring for industrial

Technical parameters :

Item Specification
Target Gas Hydrogen
Measurement Range 0 ~ 1000 ppm/0 ~ 5000 ppm
Output Current 0.10-0.30 nA/ppm
0.02-0.05  nA/ppm
Repeatability ±2%
Resolution 0.5 ppm/ 5ppm
Response Time(T90) < 60 S
Long Term Output Drift < 2% /month
Lifetime 10 years
Operating Temperature Range -20 ~ 50˚C
Operating Humidity Range 15 ~ 90% RH
Operating Pressure Range 0.1MPa±10%
Recommended Load Resistor 1kΩ
Bias Voltage Not required
Note: All measurements were taken at 20˚C, 50%RH at 1013hPa

Get An Instant Quotation

Need more information, you can submit your request here.

+86 18695879668

WeChat:18695879668

GoTop