MIX1014 Combustible Gas Sensor(CH4)

  • Target Gas: Methane/CH4
  • Range :300~10000ppm
  • Application: Domestic gas leakage detectors,Portable gas detectors

Send Email: sales@mixsen.com

Principle Introduction:

The sensing material of MIX1014 is tin dioxide SnO2, which has low conductivity in clean air. When the combustible gas exists, the conductivity of the sensor will be raise according to the gas concentration goes up. Through a simple circuit, to convert the changes of conductivity to correspond to the gas concentration.
MIX1014 Combustible 
(CH4) Gas Sensor has high sensitivity to methane, propane butane etc. combustible gas. The sensor can work in high temperature. It is low cost sensor and can be used in different applications.


High sensitivity to methane , Low power consumption , Long life and low cost , Fast response and recovery


Domestic gas leakage detectors,Portable gas detectors

Technical parameters :

Item Specification
Target Gas Methane
Detecting Range 300~10000ppm
Heater Voltage(VH) 5.0V±0.1V AC or DC
Loop Voltage ≤24V DC
Heater Resistor(RH) 55Ω±3Ω(Room Temp.)
Power consumption(PH) ≤400mW
Sensitivity RS(in air)/RS(5000ppm CH4)≥ 5
Output Voltage(Vs) 2.5V ~4.0V(In 5000ppm CH4)
Concentration Slope ≤0.6 (R5000ppm/R1000ppm CH4)
Testing condition 20±2℃, 55%±5%RH
Oxygen concentration in used place 21%, no less than 18%
If used in low oxygen concentration, pleasure contact for detail
Life Expectancy 10 years

Get An Instant Quotation

Need more information, you can submit your request here.

+86 185 6625 9936