MIX1007B Carbon Monoxide Gas Sensor

  • Target Gas: Carbon Monoxide/CO
  • Range :10~500ppm CO
  • Application: Domestic gas leakage detectors, Portable gas detectors

Send Email: sales@mixsen.com

Principle Introduction:

The sensing material of MIX1007B is tin dioxide SnO2, which has low conductivity in clean air. When the combustible gas exists, the conductivity of the sensor will be raise according to the gas concentration goes up. Through a simple circuit, to convert the changes of conductivity to correspond to the gas concentration.

MIX1007B has high sensitivity to carbon monoxide. The sensor can work in high temperature. It is low cost sensor and can be used in different applications.

Feature:

High sensitivity to wide range of carbon monoxide
High sensitivity
Long life and low cost
High anti-seismic

Application:

Domestic gas leakage detectors
Portable gas detectors

Technical parameters :

Item Specification
Target Gas Carbon monoxide
Measurement Range 10~500ppm CO
Heater Voltage(VH) 5.0V±0.1V AC or DC (high temp.)
1.5V±0.1V AC or DC (low temp.)
Heater Time(TL) 60 S±1S (High temp.)
90 S±1S (Low temp.)
Load Resistance Adjustable
Loop Voltage ≤24V DC
Heater Resistance(RH) 30Ω±3Ω(Room temperature)
Heater Power Consumption(PH) ≤900mW
Sensitivity RS(in air)/RS(150ppm CO)≥ 5
Output In Target Gas 2.5~4.3V(in 150ppm CO)
Concentration Slope(α) ≤0.6(R300ppm/R50ppm CO)
Testing Condition 20℃±2℃;55%±5%RH
Oxygen concentration in used place 21%, no less than 18%
If used in low oxygen concentration, pleasure contact for detail
Life Expectancy 10 years

Get An Instant Quotation

Need more information, you can submit your request here.